LAB TECH

> 제품소개 > LAB TECH

Single Layer Blown Film Lines

LUMF-150

- Conical Screw Diameter: 18 mm at in Feed, 8 mm at End
- Screw L/D Ratio: 30
- Screw Speed Range: 0 to 300 RPM
- Number of Heating Zones: 1
- Max Barrel Temp: 250°C
- Max Pellet Size: Standard Pellets
- Film Tower Width: 150 mm
- Max Film Lay Flat Width: 100 mm
- Haul Off Film Speed: 0.5 to 5 m/min
- Standard Die Diameter: 20 mm (Die Gap 0.8 mm)
- Height from Die to Nip-Roll: 445 to 640 mm
 

Multi Layer Blown Film Lines

LUMF-150 Co-Ex

- Conical Screw Diameter: 18 mm at in Feed, 8 mm at End
- Screw L/D Ratio: 30
- Screw Speed Range: 0 to 300 RPM
- Number of Heating Zones: 1
- Max Barrel Temp: 250°C
- Max Pellet Size: Standard Pellets
- Film Tower Width: 150 mm
- Max Film Lay Flat Width: 130 mm
- Haul Off Film Speed: 0.5 to 5 m/min
- Standard Die Diameter: 28 mm (Die Gap 1.5 mm)
- Height from Die to Nip-Roll: 460 mm
- Total Number of Extruders: 3 Single Screw Extruders
 

Single Layer Cast Film Line

LUMCR-50

- Conical Screw Diameter: 18 mm at in Feed, 8 mm at End
- Screw L/D Ratio: 30
- Screw Speed Range: 0 to 300 RPM
- Number of Heating Zones: 1
- Max Barrel Temp: 250°C
- Max Pellet Size: Standard Pellets
- Roll Width: 100 mm
- Roll Diameters: 40 mm
- Max Film Width after Neck-In: 40-45 mm Standard / 60-65 mm Optional Die
- Film Thickness: 10 to 300 µm
- Die Width: 50 mm / 75 mm (Option)
- Die Lip Opening: 0.1 to 0.3 mm
 

Multi Layer Cast Film Line

LUMCR-50 Co-Ex

- Conical Screw Diameter: 18 mm at in Feed, 8 mm at End
- Screw L/D Ratio: 30
- Screw Speed Range: 0 to 300 RPM
- Number of Heating Zones: 1
- Max Barrel Temp: 250°C
- Max Pellet Size: Standard Pellets
- Roll Width: 100 mm
- Roll Diameters: 40 mm
- Max Film Width after Neck-In: 40-45 mm Standard / 60-65 mm Optional Die
- Film Thickness: 10 to 300 µm
- Die Width: 50 mm / 75 mm (Option)
- Die Lip Opening: 0.1 to 0.3 mm
- Feed Block Type: 3-Layers A+B+A / A+B+C
- Up to 3 Single Screw Extruders
 

Others

Combi Line

- Single Layer LUMF-150 + LUMCR-50
- Easily Slide Either Blown Film Tower or Cast Film Unit to Connect to Single Screw Extruder
- Please See LUMF-150 and LUMCR-50 Specificaton

Single Screw Pelletizing Line LUMSSP-8

- Conical Screw Diameter: 18 mm at in Feed, 8 mm at End
- Screw L/D Ratio: 30
- Screw Speed Range: 0 to 300 RPM
- Number of Heating Zones: 1
- Max Barrel Temp: 250°C (Steel Barrel) / 130°C (Transparent Barrel)
- Max Pellet Size: Standard Pellets
- Pelletizer Motor Power: 30 W
- Strand Feeding Motor Power: 15 W
- Rotary Knife Speed: 0 to 100%
- Max Output with Steel Barrel (LDPE): 1 kg/hr